Rugged Ridge Rim Protector, Satin Black, 07-14 Jeep Wrangler (JK) - Manual

Copyright © 2013 Omix-Ada ® , Inc.
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 770-614-6069 | [email protected]
Jeep® JK Wrangler RIM PROTECTOR RING
2. Place Rim Protector Ring onto front face of
wheel.
(For 17” Wheel, ensure that Valve stem Recess
aligns with Valve Stem)
Install M6 Flanged Hex Head Screws by hand.
Once all M6 Screws are in place, tighten to 6 ft-lbs.
Retorque after 25 miles and check frequently
thereafter.
Contents :
1. Rim Protector Ring (1)
2. M6 Flanged Hex Head Screws (14)
Note : 15250.01/15250.02, only to be use with Rugged
Ridge 17” Wheels, P/N’s 15301.01, 15301.10,
15301.20, 15301.30, 15301.40 and15301.50
15250.03, only to be use with Rugged Ridge 18”
Wheels, P/N’s 15305.01, 15305.30 and 15305.40
1. Remove Button Head Screws from Wheel.
Page 1/1
15250.01 - Polished SS
15250.02 - Satin Black
15250.03 - Satin Black
OMIX-ADA ® TECHNICAL SUPPORT
PHONE: M-F 8am - 5pm EST 1-800-449-6649 | EMAIL: [email protected]
FOR WARRANTY INFORMATION VISIT: www.Omix-Ada.com
Valve Stem Recess
(17”Wheel only)