Airlink ASW-2402 - Manual (Page 15)

AirLink+ 15
26-port 10/100/1000Mbps Gigabit & Fast Ethernet Switch
Identifying External Components
This chapter identifies all the major external components of the Switch.
Both the front and rear panels are shown below, with a description of
each panel features.
Front Panel
Figure 4. The front panel of the Switch
LED Indicators
Refer to the next chapter Understanding LED Indicators for detailed
information on the meaning of each LED indicator.
10/100BASE-TX Twisted-Pair Ports (Port1~24)
These ports supports network speeds of either 10Mbps or 100Mbps,
and can operate in half- and full- duplex transfer modes. These ports
also supports automatic MDI/MDI-X crossover detection function
gives true “plug and play” capability, just need to plug-in the net-
work cable to the hub directly and no need to care if the end node is
NIC (Network Interface Card) or switches and hubs.
1000BASE-T Twisted Pair Ports (Port 25~26)
The Switch is equipped with two Gigabit twisted pair ports, sup-
ported auto negotiable 10/100/1000Mbps and auto MDI/MDIX
crossover detection function. These two ports can operate in half-
and full- duplex modes.