Mittler Bros Machine & Tool 2900-300 English Wheel Stand - Manual

Division of Mittler Corp.
P.O. Box 110 Foristell, Missouri 63348
10 Cooperative Way Wright City, MO 63390
(636) 745-7757
Fax: (636) 745-2874
\\Mbserver01\Engineering\Product\Product Documentation\2900 English Wheel\Stand Assm. Instructions.doc Rev1 4-17-2006
2900-300 English Wheel Stand
Assembly Instructions
Kit Includes:
1 ea.
Rear “H” frame
1 ea. Front frame
1 ea. Top tray
1 ea. Bottom tray
20 ea. 5/16-18 x 1” Bolts
28 ea. 5/16” Lock washers
28 ea. 5/16” Nuts
24 ea. 3/8” Flat Washer
8 ea.
5/16” -18 x3” Bolts
2 ea. Swivel Casters, Locking
2 ea. Rigid Caster
1ea. Instruction Sheet
1. Un-package the contents and verify that nothing is damaged or missing.
2. Lay the “H” Frame down like shown below. Attach the lower and upper trays using the 3” long bolts. Be sure to put a
3/8” flat washer on both the top & bottom of the bolt. Slip a lock washer on each bolt and then thread a nut on by
hand. DO NOT TIGHTEN NUTS YET!
2ea
Swivel
Casters
Check
Hardware
Bottom
Tray
Top Tray
2ea
Rigid
Casters
Rear “H” Frame
Front Frame
Top Tray
Rear “H” Frame
Bottom
Tray
Use 3” long
bolts. Put a flat
washer under
the bolt head
and one on the
threaded end
before the lock
washer & nut