Lutron HD-RS - Manual (Page 5)

5
Local Operation
Pressing the Tapswitch on any Dimmer, Switch, or
Remote will alternately turn the lights ON and OFF. For
HD-RD, the ON level will be the level previously set
using the Dimming Rocker. Press and hold the top or
bottom of the Dimming Rocker to raise or lower the light
level.
Double-tapping the Tapswitch on the HD-RD will turn the
lights ON to full. Pressing and holding the Tapswitch for
1/2 second (while ON) activates a 10-second long fade-
to-off.
Lamp Replacement
For routine lamp replacement, remove power from the
fixture(s) by sliding the Front-Accessible Service Switch
(FASS) to the OFF position (left). After replacing lamps,
slide the FASS back to the ON position (right) to restore
power.
Danger - For any procedure other than routine
lamp replacement, power must be disconnected
at the main electrical panel.
Tapswitch
Tap on/off
Dimming Rocker
Press to Brighten
Press to Dim
FASS
TM
Front
Accessible
Service
Switch
OFF ON
Tapswitch
Tap on/off
FASS
Front
Accessible
Service
Switch
ON
Remote Dimmer Operation
Remote Switch Operation
OFF