Australian Monitor AV2.4P - Manual (Page 11)

S P E C I F I C AT I O N S
PA G E 1 1 AV 2 . 2 P / AV 2 . 4 P – O P E R AT I O N M A N U A L
Parameter AV2.2P AV2.4P
Output Power*
Both Channels driven : 8ohm : 75W 150W
Single Channel driven : 4ohm : 120W 240W
Both Channels driven : 4ohm : 100W 200W
Bridge mode : 8 ohm : 200W 400W
Voltage Gain 20.0 V/V 28.3 V/V
Output Impedance (1kHz) 0.04 ohm 0.04 ohm
Damping Factor > 200:1 > 200:1
Slew rate > 30V/µs > 30V/µs
Frequency Response 20Hz ~ 60KHz 20Hz ~ 60KHz
THD (@ 1 KHz) < 0.02% < 0.02%
IMD SMPTE (60Hz : 7 KHz 4 : 1 < 0.03% < 0.03%
Input Impedance 20kohm 20kohm
Input Sensitivity 1 Vrms 1 Vrms
Input CMRR > 80dB > 80dB
S/N Ration : Linear > 97 dB > 97 dB
A - Weighted > 100dB > 100dB
Crosstalk > 65 dB > 65 dB
Dimension (H x W x D) mm 44mm x 482mm x 299.5mm 88mm x 482mm x 299.5mm
Shipping Weight 10 kg 15 kg
* 2ohm loads per channel not recommended
4ohm bridged loads not recommended