Australian Monitor VL8 A5 - Manual (Page 5)

PAGE 5 VOICE LINE VL8 INSTALLATION AND OPERATION MANUAL
REAR PANEL
1 Speaker Input Connector
4 pole twist lock connector - direct 4 Ohm or
70 / 100 V Input
2 Mounting Points
Several mounting points are provided to attach
the VL8 to the optional mounting bracket.
These thread points are M8 and require at least
15 mm of thread length (provided pre-fitted to
speaker).
3 Power Tap Select Switch
This switch provides selection of the desired
70 / 100 V transformer tap or the 4 Ohm
low impedance transformer bypass option.
4 Tuned Bass Port
2
2
2
1
3
4