Australian Monitor MX883 - Manual (Page 3)

I N T R O D U C T I O N A N D C O N T E N T S
PA G E 3 M X 8 8 3 I N S TA L L AT I O N & O P E R AT I O N M A N U A L
The MX883 is a stereo 8 channel audio mixer that operates from
110/230-240 VAC @ 50/60 Hz. The MX883 offers high quality audio
performance & a wide array of features in a standard 2 RU size.
For table mounting, rubber feet are supplied but these can be removed
if rack mounting is intended. There are eight dual purpose inputs
consisting of balanced XLR inputs switchable between mic & line level
and stereo RCA line level inputs. Each channel also features a line
level direct output which can be used to feed additional amplifi ers,
mixers or recording devices. An internal jumper allows each input to be
routed to the direct output either pre or post fader. Each input has front
panel trim control, status LED and bass & treble controls. Each input
channel can be routed to the left, right or aux output. The left and right
outputs have a constant Q 5 band graphic EQ stage. Priority muting is
available as an optional addition as is remote VCA master control and
tone generation.
The MX883 also features 4 segment LED output metering & the ability
to internally switch input 1 to be either pre or post master. With both
Headphone out & Record out also available the MX883 is extremely
versatile. The MX883 has taken the AMIS heritage of contractor
friendly installation product & has added the audio fi delity needed in
today’s AV contracting market.
I N T R O D U C T I O N 3
F R O N T PA N E L 4
R E A R PA N E L 5
I N T E R N A L A D J U S T M E N T S 6
I N S TA L L AT I O N & T R O U B L E S H O OT I N G 7
B A S I C S E T U P A N D O P E R AT I O N 8
D I M E N S I O N S 9
B L O C K D I AG R A M 1 0
S P E C I F I C AT I O N S 1 1
AUS, EUR, USA
Copyright 9th Feb 2006
Rev A 13/02/07
Rev B 19/03/08
This symbol is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the products
enclosure that may be of suffi cient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence
of important operational and maintenance (servicing)
instructions in the literature accompanying the appliance.
To prevent electric shock do not use this (polarised) plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
To prevent electric shock, match wide blade of plug to wide
slot, fully insert.
Caution:
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONAL.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC HOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN