Australian Monitor Essentials Microphone - Manual (Page 8)

Omni-Directional Boundary Microphone
Congratulations on your purchase of your Australian Monitor microphone.
The AM-BMo is an electret, omni-directional condenser
boundary microphone suited to choir, theatrical, piano,
acoustic and other near field mic’ing applications. Featuring a
shock-mounted capsule, hardened steel mesh grill and gold
plated XLR output connector the AM-BMo is well featured for
the demands of a live performance environment, suited ideally
for all sound reinforcement applications.
The AM-BMo also boasts a pressure gradient diaphragm
providing both high sensitivity and a wide frequency response.
The omni directional polar pattern and tailored frequency
response ensures both natural tone reproduction and high gain
before feedback, in a compact package – critical for any live
performance application. The AM-BMo also features a 3 stage
selectable low pass filter, rubber base to minimise vibration
noise, and can be either powered by batteries or phantom
power.
SPECIFICATIONS:
Type Condenser Microphone
Polar Pattern Half Omni-directional
Capsule Pressure Gradient
Frequency Response 30Hz – 20kHz
Sensitivity: -42dBV/Pa (7.9mV/Pa)
Max SPL: 132dB
Dynamic Range: 114dB
Phantom Power Requirement: 9-52VDC
or 1x AAA 1.5V battery
Battery Life: 1200 hours
Current Draw: 2mA
Output Configuration: Transformer output
Output Impedance: 200 Ohms
Output Connector: Gold plated 3 pin male XLR
Cable Length: 10m
Dimensions: 65mm x 15mm
Weight: 280g