Comfort-Aire CD-121J - Manual (Page 9)

Heat Controller, Inc. Room Air Conditioner with R-410A Owner’s Manual
8
AIR CONDITIONER FEATURES (CONTINUED)
TIMER: AUTO START/
STOP FEATURE:
Press Timer
button
DO THIS:
AIR CONDITIONER FEATURES(CONTINUED)
First press the Timer button, the Timer on indicator
light illuminates. It indicates the Auto Start program
is initiated.
Press or hold the Left arrow or Right arrow to change
the Auto time by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start.
The selected time will register in 5 second and the
system will automatically revert back to display the
previous temperature setting.
Perform the same procedures as above to set the
Timer off settings.
Press the Temp./Timer adjust button to adjust the
setting time to 0.0 at any time will cancel the
Auto Start/Stop function.
NOTE:
CHECK FILTER FEATURE:
Press Check
Filter button
DO THIS:
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED(light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
NOTE:
8
Timer
Temp.
S
Exhaust
closed open
Mode
Energy
Saver
Timer
on
Timer
off
Timer
Temp.
Auto Cool Dry Fan
Timer
Temp.
Timer
Temp.
Sleep
Check
Filter
ON/
OFF
Follow
Me Auto Med Low High
Fan
FOLLOW ME FEATURE:
(on some models)
Light flashing
NOTE:
To activate the Follow Me feature, point the remote
control towards the unit and press the Follow Me
button. The light on the unit control panel will pulse
to indicate it received the signal. It will continue to
send this signal until the feature is deactivated by
pressing the Follow Me button again. If the unit does
not receive the Follow Me signal during any 7 minutes
interval, the unit will beep to indicate the Follow Me
mode has ended. The display on the remote control
indicates the temperature at the remote ONLY.
The actual temperature can be displayed at the unit
by pressing the Fan Only mode. When in the Cool
mode, the unit display indicates the set temperature.
This feature can be activated from the remote
control ONLY. The remote control serves as a
remote thermostat allowing for the precise
temperature control at its location.
Timer
Temp.
Timer
Temp.
Sleep
Check
Filter
ON/
OFF
Follow
Me Auto Med Low High
Fan
Clean
Air
Clean
Air
Temp Temp
Timer Timer
On
Off
Sleep Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
TIMER: AUTO START/
STOP FEATURE:
Press Timer
button
DO THIS:
AIR CONDITIONER FEATURES(CONTINUED)
First press the Timer button, the indicator light
besides word On illuminates. It indicates the Auto
Start program is initiated.
Press or hold the Left arrow or Right arrow to change
the Auto time by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start.
The selected time will register in 5 second and the
system will automatically revert back to display the
previous temperature setting.
Turning the unit ON or OFF at any time will cancel the
Auto Start/Stop function.
NOTE:
Temp Temp
Timer Timer
On
Off
Sleep Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
CHECK FILTER FEATURE:
Press Check
Filter button
DO THIS:
Temp Temp
Timer Timer
On
Off
Sleep Check
Filter
Timer
Auto
Cool
Dry
Fan
Med
High
Clean
Air
CLEAN AIR FEATURE:
(on some models)
Press Clean
Air button
DO THIS:
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED(light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
NOTE:
Press the Clean Air button, the ion generator is ener-
gized and will help to remove pollen and impurities
from the air, and trap them in the filter.
NOTE:
8
Press the Timer button, the indicator light
the time by 0.5 hour increments, up to 10 hours
seconds and the
TIMER: AUTO START/
STOP FEATURE:
Press Timer
button
DO THIS:
First press the Timer button, the Timer on indicator
light illuminates. It indicates the Auto Start program
is initiated.
Press or hold the UP arrow or DOWN arrow to change
the Auto time by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start.
The selected time will register in 5 second and the
system will automatically revert back to display the
previous temperature setting.
Perform the same procedures as above to set the
Timer off settings.
Press the Temp./Timer adjust button to adjust the
setting time to 0.0 at any time will cancel the
Auto Start/Stop function.
NOTE:
CHECK FILTER FEATURE:
Press Check
Filter button
DO THIS:
This feature is a reminder to clean the Air Filter for
more efficient operation. The LED(light) will illumi-
nate after 250 hours of operation. To reset after
cleaning the filter, press the Check Filter button and
the light will go off.
NOTE:
FOLLOW ME FEATURE:
(on some models)
Light flashing
NOTE:
To activate the Follow Me feature, point the remote
control towards the unit and press the Follow Me
button. The light on the unit control panel will pulse
to indicate it received the signal. It will continue to
send this signal until the feature is deactivated by
pressing the Follow Me button again. If the unit does
not receive the Follow Me signal during any 7 minutes
interval, the unit will beep to indicate the Follow Me
mode has ended. The display on the remote control
indicates the temperature at the remote ONLY.
The actual temperature can be displayed at the unit
by pressing the Fan Only mode. When in the Cool
mode, the unit display indicates the set temperature.
This feature can be activated from the remote
control ONLY. The remote control serves as a
remote thermostat allowing for the precise
temperature control at its location.
9
AIR CONDITIONER FEATURES
CLEAN UP DOWN
FAN ON/OFF
Follow me
CHECK
FILTER
TIMER
Auto Low Med High ON OFF
CLEAN UP DOWN
FAN ON/OFF
Follow me
CHECK
FILTER
TIMER
Auto Low Med High ON OFF
CLEAN UP DOWN
FAN ON/OFF
Follow me
CHECK
FILTER
TIMER
Auto Low Med High ON OFF