Operation panel of the air conditioner – Comfort-Aire PSH-141A User Manual
Page 6
6
Installation, Operation & Maintenance
PSH-141A
Heat Controller, Inc.
AIR CONDITIONER FEATURES
Before you begin, thoroughly familiarize yourself with the functions of the control panel and
remote controller.
The unit can be controlled by the unit control panel alone or with the remote controller .
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Fig.3
NOTE: This manual does not include Remote Controller Operations, see the <<Remote
Controller Instruction>> packed with the unit for details.
OPERATION PANEL OF THE AIR CONDITIONER
1
5
3
4
Used to initiate the SLEEP operation.
SLEEP button
Controls the fan speed. Each time you press the
button, a different fan speed is selected in a
sequence as follows: LOW, MED, HI and AUTO.
The fan speed indicator light illuminates under
the selected fan settings except AUTO speed.
When Auto fan speed is selected, all of the fan
indicator lights turn off.
NOTE: On some models the fan speed may
not be adjustable when the unit is in Heat, Dry
or Auto modes, as the fan is automatically
controlled.
FAN button
1
2
3
4
4
5
6
7
8
Selects the appropriate operating mode.
Each time you press the button, a mode
is selected in a sequence that goes from
AUTO, COOL, DRY, FAN and HEAT. The
mode indicator light illuminates under the
selected mode setting.
MODE select button
Power switch on/off.
POWER button
2
Used to adjust (increase/decrease)
O
O
temperature settings(2 F/1 C increments)
O
O
O
O
in a range of 62 F(17 C) to 88 F(30 C) or
the TIMER setting in a range of 0~24hrs.
UP( ) and DOWN( ) buttons
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.
+
-
6
TIMER button
Used to initiate the AUTO ON start time and
AUTO OFF stop time program, in conjuction
with the and buttons. The timer on/off
indicator light illuminates under the timer
on/off settings.
+
-
7
SWING button
Used to initiate the Auto swing feature.
When the swing mode is ON, press the
SWING button to stop the louver at
the desired angle. Pressing and holding
the swing button will restart the auto
swing function.
O
Shows the set temperature in C
O
" F" and the Auto-timer settings.
While in DRY or FAN mode, it displays
the room temperature.
"
" or
LED Display
8
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press
and hold the Up and Down buttons at the same
time, for 3 seconds.