Silverline Cable Puller Heavy Duty User Manual

Page 6

Advertising
background image

www.silverlinetools.com

5

Cable Puller Heavy Duty

598501

Pulling Tool Safety

Ensure your cable puller is maintained in a safe working condition. Observe
the following important guidance:
• Before each use, check the condition of the equipment. Pay particular

attention to cables and locking mechanisms

• Cables should be free from kinks and should not show any evidence of

fraying or cutting

• Locking mechanisms should work freely and should be clean of

excessive dirt or grease

• Ensure the safety latches on the hooks are closed and the load is secure

before pulling commences

• Test all safety devices (including automatic) before use
• DO NOT attempt to pull items around or over a corner
• DO NOT wrap cable around any object and hook it back on itself
• DO NOT OVERLOAD: Ensure the weight of all loads is within the capacity

of this equipment (see specification)

• DO NOT LIFT with this puller. This equipment is not designed to hoist
• When pulling, allow for rolling resistance which will significantly increase

the weight of an object – particularly in cases when pulling through mud,
snow or water

• Take into account any angle of incline over which the load will be pulled
• Use an adequate sling, eyebolt or other attachment on the load to be

pulled and ensure that there is a positive engagement of the puller hook
to the load

• Do not use a pipe, lever or other device to lengthen the handle for

additional leverage; the pulley may fail, causing damage and/or personal
injury

• Under no circumstances use pulling equipment to pull people or objects

with people attached

• Do not modify any pulling equipment. Any attempt to tamper with this

equipment will invalidate its guarantee, and could result in serious injury
to yourself or others around you

• Pulling equipment should be inspected by a qualified person at least once

each year and the results of the inspection recorded in an inspection
book for future reference

• If you are in any way unsure about the safe method of using this

equipment, do not use it

598501_Z1MANPRO1.indd 5

06/09/2013 16:11

Advertising