Aigo P882 - Manual (Page 11)

11
Note: Never remove the USB cord while the computer is
reading data, as your data will be lost.
3.2 Disconnecting from your PC
After using your aigo P882, please take the following steps to
remove the mass storage device.
Windows 2000/XP:
Click the icon on the bottom right of the
screen once and a notice “Safely remove USB Storage Device” will
appear then click again, indicating the USB has been removed
safely.
4. System requirements
„ CPU: Pentium III 500 MHz or above
„ OS: Windows 2000 or Windows XP (only Windows XP can
be used for DRM-MTP)
„ Software requirement: Internet Explorer 4.0 or above
„ Hard Disk Space: Greater thanthan 100MB
„ RAM: 128MB RAM or more
„ Transmission port: USB 2.0/1.1
„ CD-ROM driver
Note: There is a built-in speaker in aigo P882.