Silverline Drill Bit Sharpener 70W User Manual
Page 6
www.silverlinetools.com
5
Electric Drill Bit Sharpener
127569
Protect yourself from vibration
Hand held power tools may produce vibration. Vibration can cause
•
disease. Gloves to keep the operator warm may help to maintain good
blood circulation in the fingers. Hand held tools should not be used for
long periods without a break.
Maintain your power tool
Ensure all ventilation holes are kept clear at all times. Overheating and
•
fire may otherwise result.
Always disconnect
Before changing fittings or accessories, always ensure that your tool is
•
disconnected from the power source.
Switch off before connecting
Ensure that the power tool is switched off before connecting to the power
•
source. If the power tool stops unexpectedly, turn the power switch to off.
Do not abuse the power cord
Be sure your cable or extension cable is in good condition. Always have
•
a damaged cable or extension cable replaced at an authorised service
centre before using it. Never pull the cable to disconnect it from the
power socket. Never carry your tool by its cable. Keep the cable away
from damp, heat, oil, solvents, and sharp edges.
Do not leave the tool running unattended
Always wait until your tool has completely stopped functioning, and has
•
been unplugged, before leaving it.
127569_Instruction Manual.indd 5
10/1/11 16:43:13