AGFA Graphite DC-730i - Manual (Page 10)

5
Inserting the Batteries
The camera is powered by two AA-size alkaline batteries or rechargeable NiMH (min.
2500 mAh / 1.2V) batteries.
Open the battery cover.
y Slide the battery cover in the direction
indicated by the arrow.
Insert the batteries.
y Insert two AA-size batteries with the
positive (+) and negative (-) poles
matching the directions indicated inside
the battery room.
Close the battery cover.
Low Battery Indicator
A low battery indicator appears on the LCD screen when the batteries are
nearly exhausted. Batteries should be replaced promptly when the low battery
indicator appears.
y Risk of explosion if battery is replaced by an incorrect type dispose of used
batteries according to the instructions.
y Be sure to turn off the camera power before insert or remove batteries.
y Use only Alkaline or NiMH battery to power this camera. Use of any other type
battery is not recommended.
y Replace all batteries at the same time. Never mix old and new batteries.
y Remove batteries if you will not be using them for a long time.
y The camera body may feel warm after extended use. This is normal.
About Battery Type
After replacing the batteries, please check the Battery Type in the setup menu (
page 18).
1
2
3
C C a a u u t t i i o o n n