SawStop Job Site Cart - Manual (Page 6)

Sa
wS
top
Sa
wS
top
Assembling Your Job Site Cart
7. Attach a leveling foot to each side frame with two 3 ⁄
8
inch wing
nuts, as shown in Fig. 7. First thread a wing nut over each
foot with the wings extending toward the bottom of the foot, as
shown, then insert one foot into the hole in each side frame,
and thread a second wing nut onto each foot. Do not fully
tighten the wing nuts at this time.
Fig. 8
Fig. 9
8. Insert one handle adaptor into the
open end of each side frame, as
shown in Fig. 8, making sure each
adaptor is oriented so that its holes
align with the holes in the side frame.
Then insert the handle into the two
adaptors until two of the holes in each
end of the handle align with the holes
in each side frame. Each end of the
handle has four holes so the handle
can be set at one of three different
heights. Chose whichever height is
most comfortable.
9. Use a 17 mm wrench and the included 6 mm hex key to mount
the handle in place with four M10 x 50 button head socket bolts
and four M10 lock nuts (see in Fig. 9).
handle
adaptor
handle
adaptor
handle
Sa
wS
top
Sa
wS
top
8
9
9
Fig. 7
5 SawStop Job Site Cart
Sa
wS
top
11
10