American Standard Cadet Corner Whirlpool and Bathing Pool 2775.018WC - Manual

H53
© 2008 AS America Inc.
CADET™ CORNER
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
CADET™ CORNER WHIRLPOOL AND
BATHING POOL
❏ 2775.018W Whirlpool featuring System I
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Dual, backrest positions
• Molded-in arm rests
• 2.1 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Eight multi-directional and flow-adjustable
jets including:
- Two Ideal-flow jets
- Two body massage jets
- Four recessed back-rest jets
(two in each backrest)
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
❏ 2775.018WC EverClean ® Whirlpool
Featuring System I:
• Same as 2775.018W except with the
EverClean System
❏ 2775.002 Bathing Pool only
Nominal Dimensions:
2159 x 1524 x 502mm
(85" x 60" x 19-3/4")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean
® incorporate a patented silver-ion
additive right into the circulation piping to protect
the pipes from mold, mildew, algae and fungus that
could cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
Revised 2/08
To Be Specified - Required:
❏
Color:
❏ Bath Filler: (specify finish)
❏ Bath Drain: 1583.470 (specify finish)
To Be Specified - Optional:
❏
Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-two per kit (specify finish)
for Body Massage Jet only
❏
Universal Tile Bead Kit: 751755-100
❏ Grab Bar Kit: 9822.200-two per kit (specify finish)
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.