Driver setup – Muxlab Active VGA Managed System User Manual
Page 20
Advertising
© MuxLab Inc.
Active VGA Managed Dispatcher Installation Guide
Page 20
3.7. Driver
Setup
When interfacing a MuxLab device with Windows 2000
(or more recent) operating system, a driver setup file
will be required.
To install the MuxLab Control Center software, go to
www.muxlab.com
and download the SC-000032-A
USB to Serial Driver. Plug the USB cable between the
device and the PC, and power up the device. The Found
New Hardware wizard will open (Figure 8). Select
Locate and install driver software.
Figure 8: Found New Hardware Wizard
Advertising