Muxlab Component Video Hub - Manual (Page 5)

© MuxLab Inc. Component Video Hub Installation Guide
Page 5
2.
Technical Specifications
Environment Component baseband video (YPbPr/RGB) and Digital Audio
Devices DVD players, DVR, AV matrix switchers, DLP projectors, plasmas, monitors, home theatre.
Transmission Transparent to the user.
3 dB Bandwidth Video: DC to 77 MHz. Digital Audio: DC to 52MHz Analog Audio: 20 to 20kHz
Insertion Loss (differential) Video: -0.8 dB @ 4 MHz
Digital Audio: -1.26 dB @ 4 MHz.
Analog Audio: 1 dB @ 4 MHz.
Video Return Loss -23dB @ 4 MHz.
Common Mode Rejection
Input: balanced. Output: balanced
Video: Greater than 40 dB over the frequency range.
Digital Audio: Greater than 31.5 dB over the frequency range
Analog Audio: Greater than 60 dB @ 1 KHz; Greater than 40 dB over the frequency range.
Crosstalk Immunity -60 dB @ 4 MHz
Total Harmonic Distortion Analog Audio: Less than 0.007% @ 1KHz.
Max. Distance via
Cat 5 Twisted Pair (UTP)*
Component Video (YPbPr):
480i/p: 1,000 ft (305m) *
720p and 1080i: 500 ft (152m) *
Digital Audio: 600 ft (182m) *
Analog Audio: 3.250 ft (990m) *
*Measured between Source (ie;DVD) and Destination (ie;Monitor) with Hub placed anywhere
between the source and destination
Compatible Baluns 500000, 500002, 500009, 500020, 5000021, 500050, 500051, 500052, 500053
Cascadability Up to two (2) levels.
Ground Loop Isolation Ground loop isolation on every port.
Cable – UTP 24 gauge or lower solid copper twisted pair wire impedance: 100 ohms at 1 MHz. Cat 3 or
better.