Installation procedure – Muxlab CATV Hub User Manual
Page 11
Advertising
© MuxLab Inc.
CATV Distribution Hub Installation Guide
Page 11
3.6.
Installation Procedure
The CATV Distribution Hub is available in 8-port (500300, 500301) and 16-
port (500303, 500304) versions. In order to install the product, please follow
the steps below:
1. Perform steps 1 to 2 listed in the previous section.
2. Ensure that the power is turned off on CATV equipment.
3. Connect one (1) coax cable from CATV head end to the RF input on the
CATV Distribution Hub.
Figure 2: CATV Distribution Hub
4. Connect the external 12VDC power supply to the hub and plug the power
supply into an AC power outlet. If power is present, then the green power
LED will be ON.
Advertising