Aqua Bath IS6032TS - Manual (Page 2)

ACCESSIBLE SERIES
• Model
IS6032TS-L valve on left.
• Model IS6032TS-R valve on right.
• Bath units designed for hospitals, nursing homes, rehabilitation
centers, hotels, motels and residential applications.
• Acrylic one-piece molded construction simplifies installation.
• Inside dimensions: 56½" W x 31½" D x 78" H.
• Includes stainless steel grab bars with mounting plates
and curtain rod.
• Can be furnished complete with valve, hand held shower set,
curtain and hooks, waste and overflow and tub fill spout.
• Can be furnish with seat: Seat Options
1) Lift out seat.
2) Factory installed fold-up seat.
• Vacuum-formed from .1875” one-piece sanitary grade acrylic.
For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
The IS6032TS is NOT ADA compliant.
Please see Aqua Bath’s full line of ADA
compliant shower and tub/shower units.
Please check with your local city and
state for code compliancy. Aqua Bath
accepts no responsibility for final code
compliance.
• Manufacturing Tolerance Of (1/4”) Due To The Nature
Of The Materials Used.
Acrylic Tub / Shower
The tub enclosure shall be Aqua Bath model IS6032TS acrylic and be molded from a single sheet so as not to have any joints or
seams, shall meet ANSI Z124.1. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to be NAHB LISTED. The enclosure shall have inside dimensions of 56½" W x 31½" D x 78" H and outside
dimensions of 60" W x 32½" D x 84" H. The approximate weight of the unit shall be 275lbs.
Standard Accessories:
1) One 20” x 36” x 1½” diameter two wall wrap horizontal grab bar and one 24” vertical grab bar, fabricated from 18 gauge
stainless steel with 1½" safety statute clearance, mounted with stainless steel bolts and secured from the rear with 3" x 3" x 11
gauge metal mounting plates. 2) 1" diameter, 18 gauge stainless steel curtain rod. After grab bars and curtain rod have been
factory installed, they will be sealed from the backside making the unit completely waterproof.
3) Ribbed bottom for slip resistance (standard).
4) Two soap trays molded 52" above floor on back wall and one soap tray at dam level on center of back wall.
Available Accessories:
1) a) Removable lift out seat. b) Factory installed fold-up seat.
2) Hand held shower set (includes 60" flex hose, swivel connector, brass nipple, lock nut, wall outlet and vacuum breaker).
3) 24" slide bar, 30" slide bar or two (2) wall brackets installed on valve wall for use with hand held shower set.
Note: The determination of the use of slide bar or wall brackets to be installed in the unit is based upon the valve package
chosen by the specifier for use in the unit. Aqua Bath recommends the use of a slide bar as an accessory in the unit rather
than the use of a glide bar / glide rail. 4) Pressure balance or thermostatic control valve. 5) Waste and overflow.
6) Shower curtain - antibacterial, with hooks. 7) Diverter spout.
8) ASTM F462 non-slip bottom.
9) Dome light, (factory drilled only, must be field installed & light shipped separately from unit).
Received and / or approved by:
Name:______________________________
Company:___________________________
Title:_______________________________
Phone:______________________________
Date:_______________________________
Modifications:
12/08
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
 www.aquabath.com 