Aqua Bath AB6033-34TS - Manual (Page 2)

For additional information, call the
Aqua Bath Customer Service
Department At 1-800-232-2284
Residential Series
AB6033-34TS
Model AB6033-34TS (AB6033-34TS-L valve on left, AB6033-34TS-R valve on right).
The tub/shower enclosure shall be Aqua Bath Model AB6033-34TS (and variations) and shall be molded from a
single sheet of vacuum formed .1875” one-piece sanitary grade acrylic so as not to have any joints or seams.
Manufacturing Tolerance Of (1/4”) Due To The Nature Of The Materials Used.
Shall meet ANSI 124.1. Unit shall have a backside flame spread of less than 30 (Class B).
Shall be designed to meet NAHB. The unit shall have inside dimensions of 56" W x 33½" D x 78" H and outside
dimensions of 60" W x 34" D x 84" H. The unit shall weigh approximately 225lbs and shall have contoured flanges
to accept drywall to insure easy and clean installation. The unit has a ribbed bottom for slip resistance (standard),
2 molded soap dishes on the back wall and an arch molded design on the back wall.
Available Accessories:
1) Shower curtain Rod. 2) Shower Curtain - antibacterial, with hooks.
3) Dome light (factory drilled only, must be field installed & light shipped separately from unit).
4) Platform seat (removable). 5) Factory installed shower door frame (shower door to be field installed).
6) Tempered glass shower door (shower door to be field installed). 7) ASTM F462 non-slip bottom.
STEAM PACKAGES: AB6033-34ST
• 5kw, 240vac, 30A steam generator.
• Electronic on/off with timer.
• Adjustable temperature control.
• Dome light.
• Platform seat (removable).
• Tempered glass door.
12/08
AQUA BATH COMPANY INC.921 Cherokee Ave.Nashville, TN 372071-800-232-2284Fax (615) 227-9446
 www.aquabath.com 