Lost password recovery, Basic view – APC NETBOTZ NBWL0455 User Manual

Page 25

Advertising
background image

NetBotz 455 Installation and Quick Configuration Manual

21

Lost password recovery

To recover from a lost password:

1. Locate the reset switch on the bottom of the appliance.

2. Use a thin wire such as a paper clip to press the reset switch for 10

seconds. This causes the system to restart.

3. Once the system restarts, login within two minutes using the default login

values:
– For Advanced View:

User ID: apc

Password: apc

– For the console:

User ID: root

Password: apc

Note: If you do not log in within two minutes after holding
down the reset switch, you must repeat the procedure.

4. After you log in, change the password to increase security.

Basic View

Use the Basic View to view the current sensor data, image capture, and other
appliance data in a HTML-based interface. Use the Basic View to perform basic
appliance configuration. The configuration tasks available from the Basic View
are limited and are included for initial appliance installation and setup. This
view is provided to allow you to use a Web browser to view appliance status.

APC supports the following Web browsers:

• Microsoft Internet Explorer

®

5.5 and higher (on Windows operating

systems only)

• Mozilla

®

-based browsers that support Firefox

®

1.x (on all operating

systems)

• Netscape

®

7.x and higher (on all operating systems)

Note: Other commonly available browsers also may work but
have not been fully tested by APC.

Advertising
This manual is related to the following products: