ConTech Lighting STPL User Manual

ConTech Lighting For the car

Advertising
background image

INSTALLATION PROCEDURES

• Position Trim Insert, Trim Plate and LED Module together as shown (Fig. 1)

• Using the (4) small Philips head screws (included), insert screws into the back of the LED Module securing all components together. (Fig. 1)

• For exterior applications, place the black gasket (provided) into position as shown (Fig. 2).

• Connect the supply leads from the electrical outlet box to the fixture wire leads using wire nuts (not provided). ALWAYS CONNECT WHITE

TO WHITE AND BLACK TO BLACK. (Fig. 2)

• Position Steplight module into J-box while carefully tucking excess wire out of the way.

• Attach Steplight module to J-box using (2) large outlet box screws. NOTE: Extra screws are provided, including optional Hex Head screws for

vandal resistant applications.

• Note orientation of trim plate for proper installation (especially in wet locations) and to ensure proper cutoff.

IMPORTANT SAFETY INSTRUCTIONS:

• Read all the instructions before installation. Save instructions for later use.

• Turn off power at fuse or circuit breaker box before installation or before doing any maintenance work.

• Product must be grounded to avoid potential electric shock and any other potential hazards.

• Product must be mounted in locations and at heights and in a manner consistent with its intended use, and in compliance with National

Electrical Code and local codes. Use of accessory equipment is not recommended.

• Installing contrary to instructions may cause unsafe conditions.

• Do not block light from the trim aperture, in whole or in part, as this may cause unsafe conditions.

Warning: Risk of fire. Most dwellings built before 1985 have supply wire rated at 60°C. Consult a qualified electrician before installation.

• To avoid hazards to children, account for all parts and properly dispose of all packing materials.

• Call the Technical Support department at Con-Tech Lighting with any installation questions: 847.559.5500.

STPL INST

For Con-Tech Lighting 2W LED Accent Steplight: STPL Series

www.con-techlighting.com

All specifications subject to change without notice.

1-847-559-5500

This document can be recycled.

Small Philips

Head Screws

Large Outlet

Box Screws

Black Gasket

Plugs

Outdoor

Junction

Box

Trim Insert

Trim Plate

LED Module

Advertising