For the first time, 2 surveillance screen – AVerMedia Technologies EB1304 MPEG4+ User Manual
Page 13
9
Chapter 2 Operating the EB1304 MPEG4
+
2.1
Using the EB1304 MPEG4
+
for the First Time
Upon connecting the power, the unit automatically detects the status of the hard
disk. The hard disk must be formatted before you can use it with EB1304 MPEG4
+
.
If you are prompt to format the hard disk, press
(select) for YES to format the
hard disk and
(menu) for NO to remain unchanged.
HARD DISKS INFORMATION
VERSION 1 . 2. 10
HDD
HDD FORMAT YES (SELECT) / NO (MENU)
HDD CHECKING . . .
SIZE 76GB 509MB
Before starting record video, adjust the date first. Press
to call up the OSD
menu, and then use
and
or
and
to go up and down and
select Submenu. And then, press
or
. In Submenu, select the Date and
press
or
again to make a selection. And then, use
and
or
and
to adjust the date and use
and
buttons to move the
selection to the left and right.
2.2
Surveillance Screen
To know if the channel is being recorded, the “
” record symbol would appear
beside the channel number. The (microphone) and
(speaker) indicate that
the audio is available. The information below the screen shows the current date
and time, recording mode (record schedule setting), and the percentage of the
used hard disk space.