Kramer Electronics VM-1055 - Manual (Page 9)

VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1010 7
4.2 Connecting the VM-1010
Always switch off the power to each device before connecting it to your
VM-1010. After connecting your VM-1010, connect its power and then
switch on the power to each device.
To connect the VM-1010 as illustrated in the example in Figure 3 :
1. Connect up to two video sources (for example composite video players) to
CHANNEL A INPUT A and CHANNEL B INPUT B BNC connectors.
2. Connect up to five video acceptors (for example, composite video recorders)
to each channel.
3. As required, select the coupling and termination, the MODE (2x1:5 or 1:10)
and adjust the EQ and LEVEL of each channel as needed.
Figure 3: Connecting the VM-1010
i