Kramer Electronics VM-3Sxl - Manual (Page 14)

13
KRAMER ELECTRONICS LTD.
EXCLUSION OF DAMAGES
Kramer’s liability for any defective products is limited to the repair or replacement of the product at
our option. Kramer shall not be liable for:
1) Damage to other property caused by defects in this product, damages based upon inconvenience,
loss of use of the product, loss of time, commercial loss; or:
2) Any other damages, whether incidental, consequential or otherwise. Some countries may not
allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitations and exclusions may not
apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from
place to place.
NOTE: All products returned to Kramer for service must have prior approval. This may be obtained
from your dealer.
NOTICE
This equipment has been tested to determine compliance with the requirements of:
EN-50081: "Electromagnetic compatibility (EMC);
generic emission standard.
Part 1: Residential, commercial and light industry"
EN-50082: "Electromagnetic compatibility (EMC) generic immunity standard. Part 1:
Residential, commercial and light industry environment".
CFR-47 FCC Rules and Regulations:
Part 15- “Radio frequency devices:
Subpart B- Unintentional radiators
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who
makes changes or modifications to the unit without the expressed approval of the manufacturer
will void user authority to operate the equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnect cables to connect the machine to other components.