Kramer Electronics VM-5DS - Manual (Page 9)

Connecting the VM-5DS
7
6 Connecting the VM-5DS
To connect the VM-5DS, as the example in Figure 3 shows, do the following 1 :
1. Connect a composite video source (for example, a composite video
player) to the VIDEO INPUT BNC connector and the AUDIO IN R and
L RCA connectors.
2. Connect the VIDEO OUT 1 BNC connector and the AUDIO OUT 1 R
and L RCA connectors to a composite video acceptor (for example, a
composite video recorder).
3. Connect the VIDEO OUT 5 BNC connector to a composite video
acceptor (for example, a video display).
4. Connect the SCALER OUT HD15 connector to a VGA acceptor (for
example, an LCD display).
5. Connect the power cord to the mains electricity.
Figure 3: Connecting the VM-5DS Video Audio Distribution Amplifier / Scaler
1 Switch OFF the power on each device before connecting it to your VM-5DS. After connecting your VM-5DS, switch on its
power and then switch on the power on each device