Kramer Electronics VP-728 - Manual (Page 9)

4 VP-728 - Overview
• Multiple aspect ratio selections
• Companion AFV (audio-follow-video) for every analog video input
• Embedded audio on the two HDMI inputs and output
The embedded audio feature is not available for the RGB resolutions 1920x1200 and
1920x1080. (It is available for 1080p)
• Built-in noise reduction and picture enhancement features
• Audio inputs - four (stereo audio or S/PDIF on two RCA connectors) for each
of the four universal video inputs; two unbalanced stereo audio (on 3.5mm
mini jacks) for the two computer graphics video inputs; and embedded audio
on the HDMI inputs
• Audio outputs - S/PDIF and unbalanced stereo audio (RCA connectors). The
machine transcodes stereo or S/PDIF audio to both stereo and S/PDIF audio
and embeds audio into the HDMI output
Tip: To use a 5.1 digital audio source, connect this HDMI or S/PDIF source (for
example, a Blu-ray player) directly to your receiver or display
• Built-in Time Base Corrector - stabilizes video sources with unstable sync
• Built-in video Proc-Amp - color, hue, sharpness, contrast, and brightness are
set individually for each input
• A BLANK button, a FREEZE button, a RESET TO XGA/720P button (to
hardware-reset the output resolution); and a PANEL LOCK button
The front panel blank, freeze and lock buttons can be programmed via the OSD menu
(see Page 34 )
• Built-in audio Proc-Amp with bass, treble, balance and loudness control, as
well as audio delay
• Firmware upgrade performed via the USB port
• Slideshow option, letting you run a slideshow via the USB port
• An OSD (On-Screen Display) – for making adjustments – that can be located
anywhere on the screen