Kramer Electronics VP-747 - Manual (Page 14)

12 VP-747 Control Software - Connecting to the VP-747
4 Connecting to the VP-747
To connect the Control Software to the VP-747:
1. Navigate to Device > Connect or click the Connect button.
The Connection Method window displays as shown in Figure 8 .
Figure 8: Connection Method Window
2. Select the connection method (via Ethernet over a LAN or serial connection)
by selecting the relevant option button.
3. For Ethernet, enter the IP address and Port number of the device and click
Connect.
To set the default IP address and Port number, press the Default button.
4. For a serial connection, select the required Com port from the drop-down list.
5. Click Connect.
If the connection is successful, the main window shown in Figure 6 appears.
If the connection is not successful, a timeout error message appears.