Atlantis Land NetFly Wireless USB Adapter USB 54 - Manual (Page 9)

USER MANUAL
Wireless USB Adapter 9
• Visually inspect the USB Adapter and make sure that it is fully
plugged in to the USB slot.
• Make sure that there is a well environment that there is no much
intrusion to have a better connection.
3. HARDWARE INSTALLATION
3.1 LED Indicator
Link
The Link LED indicator lighted green when the Wireless Adapter is
connected to wireless network successfully.
3.2 Check the installation
The LEDs of the Wireless LAN Adapter are clearly visible and the status of
the network link can be seen instantly:
1. When connected to the USB port and the driver were installed, the
LNK LED will start blinking, and it means that the device is starting
to scan an 802.11g wireless device near the 802.11g Wireless
USB 2.0 Adapter.
2. While the 802.11g Wireless USB 2.0 Adapter linked up to the
Access Point or to other Wireless LAN station, the LINK LED will
always light up.
4. SOFTWARE INSTALLATION
Before insert the USB Dongle into USB port of your computer, please
install the Utility Program first. Make sure that the 802.11g Wireless
USB 2.0 Adapter is NOT inserted into the USB slot.
4.1 Utility and Driver Installation for Windows
1. Insert the CD-ROM and the Auto-run program will appear.
Alternatively, open a file browser and double click on the
autorun.exe file located in the CD directory. In some specific
setting on Windows system, you may need to proceed the
software manually, go to your Windows Start menu and choose
Run, type “D:\USB\Vista\Setup.exe” or
“D:\USB\XP2K\Setup.exe”in the dialog box and click OK.
Note: (D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using).