Kramer Electronics VS-81SP User Manual
Page 27
Advertising
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Upgrading the VS-81SP Firmware
24
Figure 19: Atmel – Flip Window (Operation Completed)
12. Close the Atmel – Flip window.
13. Turn the POWER switch on the VS-81SP OFF.
14. Disconnect the RS-232 9-pin D-sub rear panel port on the VS-81SP unit
from the null-modem adapter.
15. Set DIP 9 OFF.
16. Set DIP 10 OFF.
17. Set DIP 12 OFF.
18. Turn the POWER switch on the VS-81SP ON.
Upon initialization, the VS-81SP works with the new firmware version.
Advertising