Kramer Electronics VS-88DTP - Manual (Page 24)

20 VS-88DTP - Operating the VS-88DTP
6.5 Acquiring the EDID
You can acquire the EDID from:
• A single connected output (see Section 6.5.1
• Several outputs (see
)
Section 6.5.2
• The default EDID (see
)
Section 6.5.3
6.5.1 Acquiring an EDID from a Single Output
)
To acquire or change the EDID from a single output:
1. Connect the acceptor to the required output from which you want to acquire
the EDID.
2. Press the EDID button.
The EDID button flashes.
3. Press the SELECT IN button to which the EDID will be copied.
The selected input number flashes on the display.
4. Select the SELECT OUT button from which the EDID will be acquired.
5. Press the EDID button.
The process is complete when the display returns to normal.
6.5.2 Acquiring an EDID from Several Outputs to Several Inputs
To acquire the EDID from several outputs to several inputs (for example, OUT
1 to IN 1 and OUT 6 to IN 3):
1. Connect the acceptors to the required outputs from which you want to
acquire the EDIDs.
2. Press the EDID button.
The EDID buttons flashes.
3. Press the SELECT IN button to which the first EDID will be copied (for
example, IN 1).
The selected input number flashes on the display.