4 warp adjustment, 1 warp the projection image on to a curved screen, Warp adjustment – Kramer Electronics VP-790 User Manual
Page 12: Warp the projection image on to a curved screen, Figure 9: the cross hatch (f) warp pattern, 4warp adjustment
10
VP-790 Blending Images - Warp Adjustment
4
Warp Adjustment
The images from both processors/projectors must be geometrically corrected to fit
the screen and the overlapped regions must be set to align accurately. This is
achieved by warping (changing the shape) the image.
1. Change the test pattern to the Warp Adjust (F) pattern.
The left hand pattern is green and the right hand pattern is magenta
intentionally.
Figure 9: The Cross Hatch (F) Warp Pattern
The color is set automatically when the position information is entered. The
alternating colors help in two ways:
•
To clearly see each projection separately
•
When the geometry adjustment is complete, the parts of the pattern in the
overlapping blend region will be super-imposed and appear white
Inaccurate adjustment can be clearly seen as a colored fringe around the white.
4.1
Warp the Projection Image on to a Curved Screen
For curved and irregular shaped screens, use the
VP-790 Warp Generator
application which calculates warp maps to be uploaded to memories built-in to the
VP-790.