Kramer Electronics VP-790 - Manual (Page 2)

VP-790 Blending Images – Introduction i
Contents
1 Introduction 1
2 Setting the Basic System 2
2.1 Optical Alignment 3
3 Setting Blend Width 7
4 Setting the 4-Corner Warp 10
5 Setting the Blend Curve 13
6 Setting the Black Level Compensation 14
Figures
U
Figure 1: Basic Setup
U
2
U
Figure 2: Image Projection
U
3
U
Figure 3: Input Screen
U
4
U
Figure 4: Multiunit Screen
U
5
U
Figure 5: Two Overlapping Images on a Screen
U
6
U
Figure 6: Two Projected Images Displaying the Horizontal Bar Test Pattern
U
7
U
Figure 7: Blend Width Incorrectly Adjusted
U
8
U
Figure 8: Blend Width Correctly Adjusted
U
9
U
Figure 9: The Warp Adjust (F) Pattern Overlapped
U
10
U
Figure 10: The Geometry Menu
U
11
U
Figure 11: The 4-corner Menu
U
12
U
Figure 12: Adjusting the Location of the Top Left Corner
U
12
U
Figure 13: The Warp Adjust pattern with an S-Curve Blend
U
13
U
Figure 14: The Multiunit menu
U
14
U
Figure 15: The Black Level Uplift Menu
U
15
U
Figure 16: The Reduce Black-Level Uplift Width Menu
U
15