Kramer Electronics RC-80 - Manual (Page 7)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your RC-80, RC-160 and RC-160L Remote Control Machines
4
3.1 Terminology Used in this User Manual
Table 1 defines some terms that are used in this user manual.
Table 1: Terminology Used in this User Manual
Term Definition
802.3 The standard specification for ETHERNET that is maintained by the Institute of Electrical
and Electronics Engineers (IEEE).
Dynamic Host
Configuration
Protocol (DHCP)
Allows the network administrator to distribute IP addresses from a central point and
automatically send a new IP address when an Ethernet point is plugged into a different
network location
Gateway A network position serving as an entry to another network. On the Internet, a node or
stopping point can be either a gateway node or a host (end-point) node.
IP Address A 32-binary digit number that identifies each sender or receiver (within a network via a
particular server or workstation) of data (HTML pages or e-mails) that is sent in packets
across the Internet. Every device connected to an IP network must have a unique IP
address. This address is used to reference the specific unit.
Local Area Network
(LAN)
Computers sharing a common communications line or wireless link, which often share a
server within a defined geographic area.
Media Access
Control (MAC)
Address
A computer's unique hardware number (or address) in a LAN or other network. On an
Ethernet LAN, the (MAC) address is identical to the Ethernet address.
Transmission
Control
Protocol/Internet
Protocol (TCP/IP)
The basic communication language or protocol of the Internet that breaks the message
into appropriately sized packets for the network, and can be used as a communications
protocol in an intranet or an extranet.
4 Your RC-80, RC-160 and RC-160L Remote Control Machines
This section defines each of the Remote Control machines:
Figure 1 illustrates the RC-80 Remote Control
Figure 2 illustrates the RC-160 Remote Control
Figure 3 illustrates the RC-160L Remote Control
Table 2 and Table 3 define the Remote Control machines 1 .
1 Some items, which appear in the table, do not appear in the illustrations since they are not included in that specific machine