Kramer Electronics RC-2C - Manual (Page 6)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your RC-2C/RC-2
4
Figure 2: RC-2C Rear Panel
Table 1: Features and Functions of the RC-2C
# Feature Function
1 RC-2C Front Panel Front panel, including two control buttons
2 PROGRAM ENABLE Switch For technical support use only
3 GND PIN
Connect to an IR emitter cable
IR OUT PIN
4 +12V PIN Connects (-) to the Ground
GND PIN Connects (+) to the connector for powering the unit
5 RS-232 Terminal Block
Connector
Connect to the RS-232 connector on the A/V equipment or a
PC or other Serial Controller, see Section 4.1