Kramer Electronics RC-8000 - Manual (Page 32)

Operation
29
8.2.3.1 Locking Switchers
To lock a specific switcher, do the following:
1. Press the TAKE button on the remote controller. The TAKE button
blinks.
2. Press the appropriate MACHINE IN SYSTEM # button on the remote
controller. The MACHINE IN SYSTEM # button blinks.
3. Press the STO button on the remote controller. The specific switcher
locks and the INPUT STATUS Display numbers on the switcher appear
dimmed.
To lock all switchers, do the following:
1. Press the TAKE button on the remote controller. The TAKE button
blinks.
2. Press the ALL button on the remote controller. The ALL button blinks.
3. Press the STO button on the remote controller. All the units lock and the
INPUT STATUS Display numbers on the switchers appear dimmed.
To lock a remote controller, do the following:
1. Press the TAKE button on the remote controller. The TAKE button
blinks.
2. Press the STO button on the remote controller. The remote controller
locks and the INPUT STATUS Display numbers on the remote controller
appear dimmed 1 .
8.2.3.2 Unlocking Switchers
To unlock a specific switcher, do the following:
1. Press the TAKE button on the remote controller. The TAKE button
blinks.
2. Press the appropriate MACHINE IN SYSTEM # button on the remote
controller. The MACHINE IN SYSTEM # button blinks.
3. Press the RCL button on the remote controller. The specific locked
switcher unlocks and the INPUT STATUS Display numbers on the
switcher no longer appear dimmed.
1 All other remote controllers remain unlocked