Apex Digital CoIor TV - Manual (Page 17)

4
Instruction Manual
BASIC FUNCTIONS (continued)
Auto Program
Channel Selection
Antenna SeIection
Press the - CH + buttons to highlight "Antenna" and press the - VOL + buttons to select "Air" or "Cable".
Skip/ Add
You may use this function to skip the undesired program position, thus dramatically quickening program
selection by the - CH + buttons.
SeIect a program position to be skipped.
Press the - CH + buttons to highlight "Skip/Add", and press the - VOL + buttons
to select " Skip" or "Add ".
Note:
Pressing the Channel Number buttons can resume the channel number which has
been skipped.
Press the Channel Number buttons to seIect a program position to be resumed, then
set it to"Skip / Add".
Tuning in
Press the button to caII up the Tune Menu.
Press the - CH + buttons to highIight "Auto Program".
Press the VOL + button and the RPTV wilI search automaticaIly in sequence. After
searching, the RPTV will store the optimum tuning position, and unused channel
number will be set to Skip mode automatically.
Notes:
1 During auto search, press the button to stop auto search.
2 When " Antenna" is set to the Air mode, Auto - search wilI search from channel number 2 to 69,
and when set to the Cable mode, it wiII search from 1 to 125 (During searching," Skip/Add" is
set to the Skip mode automaticaIIy ).
Press the - CH + buttons to highlight "Channel" and press the - VOL + buttons or
Channel Number buttons to select channeI number.
Note: A channeI number of three - digits (Iess than 125)is required to input.
MENU
DISPLAY