Kramer Electronics FC-14 - Manual (Page 4)

Your RGBHV to Component Transcoder
KRAMER ELECTRONICS, LTD.
2
In addition, the FC-14:
Recognizes any sync polarity and is compatible with both video level
(0.3V) and TTL level syncs
Transcodes any RGB video (progressive scan or interlaced) to component
format, making it ideal for standard definition video as well as for
high-definition video (VGA, SVGA and XGA)
Uses high quality analog circuitry – eliminating the artifacts associated
with digitizing and allowing the unit to operate with any video resolution!
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise levels
(often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer FC-14 in a
location free from moisture and away from excessive sunlight and dust
4 Your RGBHV to Component Transcoder
Figure 1 illustrates the front and rear panels of the FC-14. Tables 1 and 2
define the front and rear panels of the FC-14, respectively.
Figure 1: FC-14 RGBHV to Component Transcoder