Kramer Electronics FC-331 - Manual (Page 6)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
4
3.2 Recommendations for Best Performance
To achieve the best performance:

Use only good quality connection cables
1
to avoid interference,
deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)

Do not secure the cables in tight bundles or roll the slack into tight coils

Avoid interference from neighboring electrical appliances that
may adversely influence signal quality and position your Kramer
FC-331 away from moisture, excessive sunlight and dust
3.3 Accessory to Medical Equipment (IEC 60601-1)
In the modern medical environment remote access is essential, for example,
to transfer clinical data between doctors and to train to medical students.
The FC-331 is certified according to the IEC 60601-1-2, Clause 2.1.3,
Medical Electrical Equipment, Part 1: General Requirements for EMC
standard which is required when accessory devices are used at locations
where medical personnel and patients are present.
The FC-331 constitutes an optional component that can be considered
necessary and suitable as part of medical equipment or for use as part of a
medical system to provide real time simultaneous video feeds to those
present at the local medical environment and at remote locations. In this
environment, the FC-331 can be added to the system ONLY if the
connecting equipment has been evaluated and meets the IEC 60601-1-2
EMC standards. Note, that when attaching accessory devices to a digital or
analog interface, they must comply with the IEC standard for which they
are used: EMC Standard (IEC 60601-1-2), Information Technology
equipment (IEC 60950-1 (2ed)).
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com