AMX MVP-5100 - Manual (Page 30)

Configuring Communication
22 MVP-5100/5150 Modero Viewpoint Touch Panels
For more information on the Setup and Protected Setup pages, refer to the Setup Pages section on
page 45 and the Protected Setup Pages section on page 55.
Setting the Panel’s Device Number
In the Protected Setup page:
1. Press the Device Number field in the Device ID section to open the Device Number keypad.
2. Enter a unique Device Number assignment for the device, and press Done to return to the Protected
Setup page. The Device Number range is 1 - 32000, and the default is 0.
3. Press Reboot to reboot the device and apply the new Device Number.
The default password for the Protected Setup page is 1988, but this may be changed
at any time.