Panel information page – AMX MVP-5100 User Manual
Page 58
Setup Pages
50
MVP-5100/5150 Modero Viewpoint Touch Panels
Panel Information Page
The Panel Information page provides detailed panel information (FIG. 44).
Features on this page include:
FIG. 44
Panel Information page
Panel Information Page
Back:
Saves all changes and returns to the previous page.
Connection Status icon:
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Panel Type:
Displays the model of the panel being used.
Firmware Version:
Displays the version number of the G4 firmware loaded on the panel.
Setup Port:
Displays the setup port information (value) being used by the panel.
High Port:
Displays the high port (port count) value for the panel.
High Address:
Displays the high address (address count) value for the panel.
High Channel:
Displays the high channel (channel count) value for the panel.
High Level:
Displays the high level (level count) value being used by the panel.
Serial Number:
Displays the specific serial number value assigned to the panel.
Setup Pages Version:
Displays the type and version of the Setup pages being used by the panel.
Screen Width:
Displays the screen width (in pixels). MVP-5100 = 640 pixels.
Screen Height:
Displays the screen height (in pixels). MVP-5100 = 480 pixels.
Screen Refresh Rate:
Displays the video refresh rate applied to the incoming video signal.
Screen Rotation:
Displays the degree of rotation applied to the on-screen image.
Power Up Page:
Displays the page assigned to display after the panel is powered-up.
Start Up String:
Displays the start-up string.
Wake Up String:
Displays the wake up string used after an activation from a timeout.
Sleep String:
Displays the sleep string used during a panel’s sleep mode.
File System:
Displays the amount of Compact Flash memory available on the panel.
RAM:
Displays the available RAM (or Extended Memory module) on the panel.
Panel Start Time:
Displays the time the panel last started or rebooted.
Bulb Hours:
Displays the number of hours elapsed with the display on full power.