Specifications – ACTiSYS ACT-IR100M User Manual
Page 15
ACTiSYS Corp.
IR Printer Adapter IR100M+/100M/100MP
SPECIFICATIONS
Model:
ACT-IR100M+/100M/100MP
Carrier:
Infrared radiation (peak wavelength: 850 to 1050 nm)
IrDA SIR Transmission Speed:
9.6, 19.2, 38.4, 57.6, 115.2K bps
Parity Bit:
None
Data:
8
bit
Stop Bit:
1 bit
Error Check:
CRC
Parallel Interface:
Centronics 36F/36M Cable to Parallel Printer.
DB 25M/Centronics 36M Cable to PC Parallel Port.
Power Consumption: 0.30W During Printing
Operating Temperature:
0
o
C to 40
o
C (32
o
F to 104
o
F)
IR100M+
IR100M
IR100MP
Dimension
2.68” (W) x 3.15” (L) x 1” (H)
(68mmW x 80mmL x 25mmH)
Cable (IR220L+)5’11” (180cm)
2.36” (W) x 3.94” (L) x 0.79” (H)
(60mmW x 100mmL x 20mmH)
2.68” (W) x 3.15” (L) x 1” (H)
(68mmW x 80mmL x 25mmH)
Weight
6.8 oz (193 gr.)
(Printer Adaptor Only)
6.9 oz (197 gr.)
(Printer Adaptor Only)
6.6 oz (188 gr.)
(Printer Adaptor Only)
Serial
Interface
DB9 Male Connector on
IR100MB DB9 Female
Connector on IR220L+
Power
Source
AC 120V 50/60Hz with AC
adapter. 7.5V DC, 300mA
(AC adapter for spec. of other
countries also available)
AC 120V 50/60Hz with AC
adapter. 7.5V DC, 300mA
(AC adapter for spec. of other
countries also available)
Power supplied by Parallel Port.
3.3V DC, 100mA
Release 3.2, December 9, 2003
15
© Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved