Kramer Electronics TP-126 - Manual (Page 14)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
12
6 Technical Specifications
The TP-125, TP-126 technical specifications are shown in Table 7:
Table 7: Technical Specifications of the TP-125 / TP-126
TP-125 TP-126
INPUTS: Video: 1 UXGA on an HD15 connector
Audio: 1 audio ANALOG 3.5mm mini jack 1 RJ-45 LINE IN connector
OUTPUTS: 1 RJ-45 OUT connector Video: 1 UXGA on an HD15 connector
Audio:
1 audio S/PDIF RCA connector
1 audio ANALOG 3.5mm mini jack
RESOLUTION: Up to UXGA or 1920x1200
MAX. OUTPUT LEVEL: Video: 1.6V
Audio: 2.3V
CONTROLS: RS-232 3 PIN Terminal Block RS-232 3 PIN Terminal Block
Level: –7.5dB to +4.4dB,
EQ.: 0dB to +33dBm (130m) @ 50MHz
RS-232 BAUD RATE: Up to 19200kbps
RS-232 MODE: Full-duplex
BANDWIDTH: Audio: 20Hz – [email protected]
S/N RATIO: Audio: <–80dB
TOTAL GAIN: Audio:
Analog/analog: 0dB
Analog/SPDIF: –12dBFS
COUPLING: AC
TND+N: Audio: <0.01%
POWER SOURCE: 12 VDC 60mA
DIMENSIONS: 12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95"), W, D, H
WEIGHT: 0.3 kg. (0.67 lbs.) approx.
ACCESSORIES: Power supply