Kramer Electronics TP-1xl User Manual
Page 6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
The TP-1xl and TP-2xl Video Line Transmitter and Receiver
4
4.2 Your TP-1xl Video Line Transmitter
Figure 1 and Table 1 define the
TP-1xl:
Figure 1: TP-1xl Video Line Transmitter
Table 1: TP-1xl Video Line Transmitter Features
#
Feature
Function
1
POWER Switch
Illuminated switch for turning the unit ON or OFF
2
CV IN BNC Connector
Connect to the composite video source
3
GAIN Trimmer
Turn to adjust the output signal level
1
4
COMP
HF Trimmer
Turn to adjust the output signal equalization
1
5
LINE OUT Terminal Block
2
Connect to the LINE IN terminal block on the TP-2xl
6
Power Connector with Fuse AC connector enabling power supply to the unit
1 Insert a screwdriver into the hole and carefully rotate it, to trim the level
2 The second and third blocks marked + and – (video + and video – respectively)