M&G DuraVent PolyPro® Flex - Manual

For current pricing and availability, please call customer service at 800-835-4429.
Information published in all M&G DuraVent bulletins is current at time of publication and is subject to change without notice.
M&G DuraVent, Inc. www.duravent.com ©2014
Need to run multiple flexible liners in a single chimney
or B Vent space? Do your installations have an endless
variety of flue sizes and conduit sizes?
M&G DuraVent’s new solution for venting multiple Polypro liners (flex or rigid)
provides a simple and flexible solution. For support, M&G DuraVent simplifies the
installation by using a hose clamp and new reline hanger support. The reline upper
plates finish the install and provide a water tight seal.
A great combination for two pipe venting systems for 90+ furnaces or when you just
plain need to vent more than one appliance in the same space.
New reline allows for a liner for flue and a liner for combustion air, creating an easy
conversion to black for exposed pipe. For specific installation guidance per our listing,
please reference our installation instructions at DuraVent.com
All PolyPro terminations and components are listed.
Reline Upper Plate
2PPS-RPU; 3PPS-RPU; 4PPS-RPU
Used to seal pipe penetration with gasket, plate needs to be silicone sealed
and fastened to (field fabricated) support plate.
A Simple and Flexible Solution
For Venting Multiple PolyPro Liners
Reline Hanger Support
PPS-RH
Universal for 2”-4” diameters. Used to support flex under the support plate.
Clamps around the flex and is fastened to the support plate, then covered by
the reline upper plate at the correct size.
SIZE 2” | 60mm 3” | 80mm 4” | 100mm
ORDER # 2PPS-RPU 3PPS-RPU 4PPS-RPU
LIST PRICE $12.50 $13.15 $13.45
SIZE 2” - 4” | 60mm - 100mm
ORDER # PPS-RH
LIST PRICE $27.85