Alpine CDE-9846 - Manual (Page 9)

8
-EN
CD/MP3
CDE-9846
CDE-9842
Playback
The following table shows which discs can be played on which
models.
CD CD-TEXT MP3
CDE-9846 \ \ \
CDE-9842 \
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → CD → TUNER
2
CDE-9846:
While playing back MP3, press 1 9 or 8 2 to select
the desired folder.
Pressing and holding 1 9 or 8 2 will change folders
continuously.
MP3
F01 T03
Folder number
display File number
display
3
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file):
Press g.
Fast backward:
Press and hold g.
Advancing to the beginning of the next track (file):
Press f.
Fast forward:
Press and hold f.
4
To pause playback, press -/J.
Pressing -/J again will resume playback.
5
To eject the disc, press c.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 2 seconds.
CDE-9846 (compatible with MP3):
• The CD-player can play discs containing audio data and MP3 data.
• The track display for MP3 data playback is the file numbers
recorded on the disc.
MP3 Play Display
The folder number and file number will be displayed as described
below.
CDE-9846:
• If the folder number or file number are three digits, “F” or “T” is
not displayed.
• Press TITLE/ to switch the display. Please see “Displaying the
Title/Text” (page 14) for information about display switching.
-/J
SOURCE/
POWER
g f
c
TITLE/
-/J g f
c
TITLE/
6 4
5
1 9
8 2
Rotary encoder
6
4 5
3
SOURCE/POWER