Sunlight Supply Titan Controls® Atlas® 1 - CO2 Monitor/Controller - Manual

Instructions for Use
1. Mount Atlas ® 1 on a wall within a few feet of your
plants; should be placed at plant height.
2. Plug in CO
2
Generator or Regulator 120 volt cord
into the back of the Atlas ® 1 piggy-back cord.
3. Plug the Atlas ® 1 power cord into a 120 volt outlet.
4. Turn “on” the power switch.
5. See the included instructions to set your
altitude and PPM level.
Controller Specifications
Size: 8" H x 4" W x 2.5" H
Weight: 2 lbs.
Voltage Input: 120 volts
Voltage Output: 120 volts
Maximum Amperage: 15 amps
Hertz: 60 Hz
Control Range: 0 – 2000 PPM
Calibration Internal: 3 years
Stability: Typical Deviation +/- 75 PPM/year
Operating Temperature: 35
o to 125 o F
Cordset: 6 feet, 14 AWG
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Atlas ® 1
CO
2
Monitor/Controller
Easy Guide
Controlling a
CO
2
Generator
Controlling a
CO
2
Tank with Generator
Atlas ® 1
Atlas ® 1
CO
2
Regulator
Atlas ® 1
Atlas ® 1
CO
2
Regulator
VANCOUVER, WASHINGTON U.S.A.
®
®