WeatherTech No-Drill MudFlap - Manual (Page 2)

2
MF013
Prepare the plastic rivet for installation by removing
the pin from the base. Insert the base fully into the
top hole of the MudFlap and through the existing hole
in the vehicle. Insert the pin into the base and press
firmly to secure the rivet.
Begin passenger side installation by
parking the vehicle on a level surface.
Repeat steps 3-7.
Congratulations!
Your new WeatherTech ® No-Drill MudFlaps
have been installed!
Your WeatherTech ® No-Drill MudFlap carries a
Lifetime Warranty against defects in materials and
workmanship when installed correctly.
First ensure that the QuickTurn ™ fasteners are posi-
tioned properly by pressing in the direction indicated
by arrow 1. Then, hand tighten the bottom QuickTurn ™
fastener (arrow 2). Verify that this QuickTurn ™ fastener
is in the fully locked position.
7
7
8 8
1
Pin Base
Locked Position Locked Position
5 5
9 9
6 6
Repeat this process with the top QuickTurn ™ fastener.
Questions? Call customer service @ 630.769.1500
Monday thru Friday, 9 a.m. to 5 p.m. Central Time.