AMC Wireless HDMI Video Link XN-11n - Manual (Page 8)

Page:
8
of
10
J. Installing the XN-11n Wireless HDMI Video Link,
1. No Pre-wiring required
The XN-11n is using wireless 802.11n to link between HDMI sources to Video Monitors
with HDMI inputs. So there will be no pre-wiring for the system installation required.
2. Using HDMI cables to connect Sources with HDMI outputs to HDMI 1 & HDMI 2 inputs of
AMC XN-11n Transmitter.
3. Using HDMI Cable to connect Video Monitor with HDMI input (TV or Video Monitor) to
HDMI output of AMC XN11-n Receiver.
4. Plug power cords of XN-11n Transmitter and Receiver to AC wall power.
5. Switch Power Switches on rear panels of XN-11n Transmitter and Receiver to ON. The
Power and Link LED's will be lighted up indicating the XN-11n Transmitter and Receiver
are linked together through wireless 802.11n
6. Select HDMI 1 or HDMI 2 input by pressing INPUT selector button on the XN-11n
Transmitter. The selected corresponding HDMI 1 or HDMI 2 LED on XN-11n front panel
will be lighted up.
7. When you want to turn off the system, please switch OFF the power switched on rear
panel of XN-11n transmitter and receiver.
P a g e 8 o f 1 0
P N : 2 1 - X N - 1 1 n _ I M _ A